Power On and Start Oil Pump
Turn on the control panel switch, start the oil pump, and confirm that the pump's operating sound is normal (the machine should not move at this time).
Stroke Adjustment
Purpose: To prevent excessive downward movement of the upper die, which could damage the mold or the machine.
Operation:
When adjusting the upper die to its lowest position, ensure there is a gap equal to the sheet thickness between it and the sheet material.
Supports electric quick adjustment to improve efficiency.
Bending Groove Selection
Principle: The groove width is generally 8 times the sheet thickness.
Example: When bending 1mm sheet material, select an 8mm wide groove.
Backgauge Adjustment
Function: Positions the sheet material for bending.
Operation:
Supports electric quick adjustment and manual fine adjustment, similar to a shearing machine.
Ensuring backgauge accuracy to avoid bending deviation.
Foot Pedal Controlled Bending
Operation:
Depress the foot pedal to start bending; release to stop; press again to continue bending.
Flexibility: Operation can be interrupted or resumed at any time to adapt to different processing needs.
